Building and Civil Engineering Lab

Cement And Concrete Testing Equipments

Semi Automatic Compression Testing Machine (Electrically Cum Manually Operated (2 Pillar Model)

Model: SL-CC-013

Compression Testing Equipment Electrically cum Manually (Hand) Operated. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. In the Electrically Operated Pumping Units, load gauges are fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the load gauge reading. The electrically operated pumping units are also fitted with hand operated pump.

A) Compression Testing Machine Electrically cum Manually (Hand) Operated fitted with single load gauge:

Model SL-CC-009 SL-CC-010 SL-CC-011 SL-CC-012 SL-CC-013 SL-CC-014
Capacity (in KN) 250 KN 500 KN 1000 KN 1500 KN 2000 KN 3000 KN
Pressure Gauge (In KN) 250 KN 500 KN 1000 KN 1500 KN 2000 KN 3000 KN
Least Count (In KN) 1 KN 2 KN 5 KN 5 KN 10 KN 15 KN
Pressure Gauge
Diameter (mm)
200 200 200 200 200 200
Vertical Daylight (mm) 310 Adj 310 Adj 310 Adj 310 Adj 310 Adj 310 Adj
Horizontal Clearance(mm) 210 210 260 280 330 380
Platen Diameter(mm) 200 200 220 250 300 300
Ram Diameter (mm) 83 117 165 181 234 234
Ram Travel (mm) 50 50 50 50 50 75
Motor H.P 0.5 0.5 1 1 1 2
Motor Voltage 220V, 1Ph
50Hz
220V, 1Ph
50Hz
440V, 3Ph
50Hz
440V, 3Ph
50Hz
440V, 3Ph
50Hz
440V, 3Ph
50Hz
Specimen Size (Can be Tested)
Cube 50mm
70.6mm
50mm
70.6mm
100mm
100mm
150mm
100mm
150mm
100mm
150mm
100mm
150mm
Cylindrical ----- ----- 100 x 200
150 x 300
100 x 200
150 x 300
100 x 200
150 x 300
100 x 200
150 x 300