IC Engine Lab Equipments

IC Engine lab Equipments

Three Cylinder Four Stroke Petrol Engine

Three Cylinder Four Stroke Petrol Engine Test Rig With Morse Test


The setup consists of three cylinder, four stroke, petrol engine connected to dynamometer for engine loading. The setup has stand-alone type independent panel box consisting of air box, fuel tank, manometer, fuel measuring unit. Engine jacket cooling water inlet, outlet and calorimeter temperature is displayed on temperature indicator. Flowmeters are provided for cooling water and calorimeter flow measurement. Provision is also made for conducting Morse test

. Study of engine performance for power, efficiencies, fuel consumption, air fuel ratio and heat balance
. Morse test


Electric supply: Provide 230 +/- 10 VAC, 50 Hz, single phase electric
supply with proper earthing. (Neutral - Earth voltage less than 5 VAC)

Space: 3500Lx4000Wx2000H in mm, 
Water supply: Continuous clean and soft water @4000 LPH, Head 10 m.(min), Connection 1" BSP with tap/valve.
Drain: Provide drainpipe 2½" NB size.
Exhaust: Provide exhaust pipe 1½" NB size.
Fuel, oil: Petrol: @ 10 liter, Lub. oil: @ 3.5 liter (20W40)


Product Engine test setup 3 cylinder,4 stroke, Petrol
Product code TH 13
Engine Refurbished Engine 
Make Maruti, Model Maruti 800, Three cylinder, 4 stroke, petrol, 796cc (approx), water cooled with Carburetor 
Dynamometer Type Rope with loading device (Model TH 13 R)
Type Electrical with loading device (Model TH 13 E)
Type Hydraulic with loading device (Model TH 13 H)
Type Eddy Current with loading device (Model TH 13 ED)
Propeller shaft With universal joints
Air box M S fabricated with orifice meter and manometer
Fuel tank Capacity 8 lit 
Calorimeter Type Pipe in pipe
Speed indicator 
Temperature sensor 
Fuel flow Fuel measuring unit, Range 0-450 ml
Air flow Manometer, Range 100-0-100 mm
Flowmeter Engine cooling and Calorimeter