- +91-9971077233, +91-9821041467
- labequipments.in@gmail.com
- ENG
Driver
Spindle Motor: Two-speed Motor 4 / 6 ( 3 phase 2.2/2.8kw)
Manual three jaw chuck 1pc
Gang Tool Carriage& Gang Tool Holder(3pcs)
Hand Wheel
Thread Function
Coolant Pump
Working Lamp
Enclosed Shield for Ball Screw
RS232 Communication Cable& Communication SoftwareCD
( To connect CNC Controller with PC)
Tricolor Lamp for Machining State Indication
| Item | Specifications | Unit | Parameter | |
|---|---|---|---|---|
| Capacity | Max. Swing Dia. over Bed | mm | 320 | |
| Max. Swing Dia. over Slide | mm | 150 | ||
| Max. Through Dia. of Bar | mm | 28 | ||
| Max. Machining Length | mm | 200 | ||
| Thread | Metric | mm | 0.25-100 | |
| Range | Inch | TPI | 100-4 | |
| Spindle | Speed Range | Frequency Conversion | r/min | 50-3000 |
| Spindle Bore | mm | 38 | ||
| Taper of Spindle | 0 | 45 | ||
| Tube Bore | mm | 38 | ||
| Size of Chuck | mm | 120 | ||
| Power of Spindle Motor | kw | Two Speed 4/6 (3 phase 2.2 kw) | ||
| X.Z Axes | Feeding Speed of X-axes | m/min | 3 | |
| Feeding Speed of Z-axes | m/min | 6 | ||
| Power of X-axes Motor | kw | 6 | ||
| Power of Z-axes Motor | kw | 1 | ||
| Torque of X-axes Motor | Nm | 12Nm (Step) | ||
| Torque of Z-axes Motor | Nm | 12Nm (Step) | ||
| Min. Setting Unit of X-axes | mm | 0.001 | ||
| Min. Setting Unit of Z-axes | mm | 0.001 | ||
| Tool Post | Type of Tool Post | -- | Gang Tool Carriage | |
| No. of Tools | 1-8 Station (Gang Tool Holder) | |||
| Size of Tools Shank | mm | 15 x 15 or 20 x 20 | ||
| Other | Power of Lubrication Oil Pump Motor | W | 4 | |
| Power of Coolant Pump Motor | W | 40 | ||
| Overall Dimension | mm | 1270(L)*950(W)*1450(H) | ||
| Net Weight | kg | 800 | ||
| CNC System | -- | GSK928TC/980TB | ||